The Thiết bị Khí Hỗn hợp LISHI LASER delivers micro-oxygen cutting for high-power laser machines (3KW–60KW). Burr-free edges, faster cutting speeds, and ultra-low power consumption.
Đầu tư từ ~$18.000 · Thời gian hoàn vốn điển hình: 6–12 tháng · Một thiết bị phục vụ tối đa ba laser
Our nitrogen oxygen mixing device uses công nghệ cắt laser vi oxy to produce a precisely calibrated N₂/O₂ mixed gas — eliminating burrs on carbon steel while delivering 3× faster cutting speed than traditional oxygen cutting. Designed for high power laser machines from 3kW to 60kW.
Raw materials stored in tanks, pressure 20–25 bar
Converts liquid gases to gaseous form
Stable pressure + proportional mixing → N₂ 95% / O₂ 5%
Output: 12–16 bar, flow rate up to 200m³/h
Input: N₂ + O₂ at 20–25 bar. Output: N₂ purity ~95%, pressure 12–16 bar, max flow 200m³/h. Compact gas tank (capacity >3m³).
800mm × 350mm × 1100mm, weight 90kg. One device supports up to three laser machines simultaneously (One-to-Three configuration).
High cutting speed + zero burrs. After installation, adjust ratio between N₂ 95% and O₂ 5% for different board thicknesses. Built-in program analyzes usage ratio and records gas purity requirements.
Works with all major brands: HAN'S, DNE, PENTA, LEAD, HSG, and more. Compatible with BODOR, JIATAI, HG LASER, XUNLEI, and other global brands.
Burr-free edges, 3× faster cutting speed, and near-zero electricity cost. Our maintenance-free gas supply system is compatible with Han.s laser, DNE, PENTA, LEAD, HSG, BODOR and other major brands.
Increase laser cutting speed up to 3× compared to oxygen cutting. Example: 8mm carbon steel at 16m/min with mixed gas vs only 2–3m/min with O₂.
Unlike nitrogen cutting which produces burrs on plates ≥8mm (3kW) or ≥10mm (20kW), mixed gas cutting produces clean, burr-free surfaces on carbon steel — no secondary grinding needed.
Only 2 kWh per 24 hours — near-zero electricity cost. The device has no moving parts and requires no maintenance. Compare this to air compressors that draw 15–30 kW continuously and need regular filter/oil changes.
Power consumption: only 2 kWh / 24 hours. Unlike air compressors requiring filter/oil changes every 3,000 hours, our industrial laser gas equipment is maintenance-free.
The only manufacturer with stable one-to-three mixed gas equipment. One industrial gas mixing station powers up to three laser machines of different power levels simultaneously.
Air compressors risk oil/water contamination burning laser head lenses ($5,000–$50,000 loss). Our pure liquid gas source keeps your optical system 100% safe.
| Factor | Khí Hỗn hợp | O₂ (Oxygen) | N₂ (Nitrogen) | Air |
|---|---|---|---|---|
| Cutting Speed | 3× faster (e.g. 16m/min @ 8mm CS) | 2–3m/min @ 8mm CS | Similar to mixed gas | 30% slower than mixed gas |
| Cut Surface | Smooth, no burrs | Oxidized, rough edges | May have burrs on thick plates | Contaminated, rough |
| Gas Consumption | 1/3 less than N₂ | Similar total | High | Rất cao (compressor) |
| Power Cost | 2 kWh/24h | High | High | Rất cao (compressor) |
| Small Hole Piercing | Some burrs during pierce | Best for small holes | Good | Poor |
| Equipment Protection | No pipeline contamination | Standard | Standard | Risk of lens contamination |
Xem bạn có thể sản xuất — và kiếm được — nhiều hơn bao nhiêu khi chuyển từ O₂ sang khí hỗn hợp LISHI LASER. Dựa trên dữ liệu tốc độ cắt thực tế từ người dùng trên toàn thế giới.
Cutting Speed
Cutting Speed
Tăng Lợi nhuận Hàng năm Ước tính (USD)
$0
Theoretical upper bound based on your inputs. Real-world results depend on job mix, nesting efficiency, and machine uptime.
Get detailed cutting data tailored to your 3KW–60KW laser setup.
Or contact us directly: WhatsApp +52 557 208 0065
Most users choose air compressor for low upfront cost, but three hidden costs eat into your profit.
2 kWh/24h — almost maintenance-free
~$73/year electricity
Silver-white surface, zero burrs
Ready for immediate delivery
100% safe — pure liquid gas source
Zero optical risk
While air seems free, your real cost is in maintenance, rework, and lens replacement. Mixed gas costs less in the long run — and delivers superior quality.
Optimal carbon steel cutting thickness range for each laser power level. Mixed gas delivers consistent high-speed cutting across all thicknesses.
| Thickness | Mixed Gas Speed |
|---|---|
| 1mm | 28–35 m/min |
| 2mm | 16–20 m/min |
Best for ≤2mm carbon steel
| Thickness | Mixed Gas Speed |
|---|---|
| 1mm | 35–45 m/min |
| 2mm | 20–25 m/min |
| 3mm | 12–14 m/min |
| 4mm | 8–10 m/min |
| 5mm | 6–7 m/min |
| 6mm | 5–6 m/min |
Best for ≤6mm carbon steel
| Độ dày | Tốc độ Khí Hỗn hợp |
|---|---|
| 6mm | ~18 m/min |
| 10mm | 4.5–5 m/min |
| 12mm | ~4 m/min |
| 16mm | 3–4 m/min |
Best for ≤16mm carbon steel
| Độ dày | Tốc độ Khí Hỗn hợp |
|---|---|
| 2mm | 22 m/min |
| 6mm | 18 m/min |
| 8mm | 16 m/min |
| 10mm | 12–14 m/min |
| 12mm | 10–12 m/min |
| 16mm | 5–6 m/min |
| 20mm | 3–4 m/min |
| 25mm | 2.5–3 m/min |
Best for ≤25mm carbon steel
| Độ dày | Tốc độ Khí Hỗn hợp |
|---|---|
| 8mm | ~16 m/min |
| 10mm | ~12 m/min |
| 12mm | ~10 m/min |
| 16mm | ~8 m/min |
| 20mm | ~5.6 m/min |
| 25mm+ | Liên hệ for details |
Best for ≤30mm carbon steel
| Độ dày | Tốc độ khí hỗn hợp |
|---|---|
| 25mm | ~10 m/min |
| 30mm | ~7 m/min |
| 40mm | ~3.5 m/min |
| 45mm | ~2 m/min |
Tốt nhất cho thép carbon ≤45mm
Thông số 40KW cũng có sẵn. Liên hệ chúng tôi để biết dữ liệu chi tiết.
Xem Tất cả Thông số →Actual cutting footage from end users worldwide. No embellishment — real data, real performance.
Dual power setup, one machine feeds two — zero compromise on speed
Mixed gas for high-power lasersThick plates, no burrs. 10–14 m/min on 10mm, previously only achievable with O₂
High-power mixed gas cuttingUltra-thick cutting at 3.5 m/min. Where N₂ struggles, mixed gas delivers
Ultra-high power mixed gasSmooth aluminum edges, no oxidation. Faster than air, cleaner than N₂
Aluminum mixed gas cuttingPrecision aluminum cutting with micro-oxygen — speed and quality in one pass
Thin aluminum mixed gasPaper-thin aluminum, zero burn-through. Mixed gas enables what N₂ cannot
Precision thin aluminum cuttingFrom coastal megafactories to inland workshops, mixed gas technology now powers laser cutters on multiple continents — and the footprint is expanding every quarter.
Exclusive distributor partnerships available in select regions. Ship one container, build your market.
A mixed gas device precisely blends liquid nitrogen (N₂) and liquid oxygen (O₂) into a calibrated N₂/O₂ gas mixture (typically 95%/5%). This micro-oxygen mixture is used as the auxiliary gas in high-power laser cutting, delivering 3× faster cutting speed on carbon steel compared to pure oxygen, while eliminating burrs entirely.
Yes. The Thiết bị Khí Hỗn hợp LISHI LASER works with all major laser brands including HAN'S, DNE, PENTA, LEAD, HSG, BODOR, JIATAI, HG LASER, and XUNLEI. It supports machines from 3kW to 60kW. If your machine uses standard auxiliary gas connections, it is compatible.
Cutting range depends on laser power: 3kW handles up to 16mm carbon steel, 20kW up to 25mm, 30kW up to 30mm, and 60kW up to 40mm. It also cuts stainless steel and aluminum with excellent results.
The mixed gas device is designed for speed and cut quality — not gas savings. It consumes only 2 kWh per 24 hours (near-zero electricity cost). The primary value is 3× faster cutting and burr-free edges, which eliminate manual deburring labor. Gas costs may be similar or higher than pure N₂, but the throughput and quality gains far outweigh the difference for professional shops.
No. Unlike air compressors that need filter/oil changes every 500–3,000 hours, the LISHI Thiết bị Khí Hỗn hợp is maintenance-free. It uses pure liquid gas sources with no moving parts that wear out. Power consumption is just 2 kWh/24h.
Yes. LISHI LASER is the only manufacturer offering a stable One-to-Three configuration. One mixing station can simultaneously supply up to three laser machines of different power levels (e.g., one 3kW and one 20kW).
Air cutting produces oxidized, rough edges and risks oil/water contamination that can burn expensive laser head lenses ($5,000–$50,000). Mixed gas delivers smooth, burr-free, silver-white cut surfaces with zero contamination risk — and cutting speeds 30% faster than air.
Installation is straightforward and typically completed within one day. The device connects to your existing liquid gas supply and laser machine. We provide detailed installation guides and remote technical support for all customers.
Triển khai thực tế. Dữ liệu thực. Kết quả thực.
Một nhà sản xuất kim loại tấm lớn đã nâng cấp bốn laser BODOR với khí hỗn hợp LISHI. Tốc độ cắt tăng từ 2,3 m/min lên 7,1 m/min. Bộ phận mài giảm từ 6 công nhân xuống còn 0.
Đọc toàn bộ case study →Laser PENTA 30kW kết hợp với thiết bị khí hỗn hợp LISHI. Đạt 16 m/min trên 8mm, 9,3 m/min trên 12mm — tất cả đều không ba via. "Vết cắt cực kỳ sạch" theo kỹ sư tại chỗ.
Đọc toàn bộ case study →Connect one device to your laser machine and start cutting 3× faster today. Available for 6KW–60KW machines.
